Hollow out Laser Transparent Waterslide Decal Paper Film Free Laser Water Slide Decal Transfer Paper Print

1、Print on the glossy side with a laser printer. (mirror mode printing)
2、Crop the picture.
3、Soak it in water for 30-60 seconds (warm water on cold days) to fully slide and separate the base paper from the transfer film.
4、Clean the object and keep it moist and hydrated; stick the graphic side (printing side) to the surface of the object and remove the base paper.
5、Fold the base paper in half several times to remove the moisture and air bubbles under the transfer film, and dry the surface moisture with a tissue.
6、Put the object into the oven and bake it for 10 minutes at the temperature of 130℃.
7、After cooling, take a drop of water on the corner of the film without the pattern, and wipe off the water after 30 seconds.

8、Pull up the transfer film along the corner of the water drop position and tear off the surface transfer film.