SPEEDIER PCIe3.0/4.0 Mini-PCIe To M.2 NVMe SSD Extension Cable
Brand name: ADT-LINK
Product name: Mini-PCIe To M.2 NVMe Key-M SSD Extension Cable
Product model: R64SF 4.0
Transfer speed:PCIe 3.0/4.0 x1
Wire length:5 ~100 cm, the length can be customized
Product function: M.2 NVME SSD solid state drive extension transfer to the mini-pcie interface of the motherboard
Cable length Description:
The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector's length. For the wire length, please refer to the blue arrow in the figure below.
Is there any EMI shielding for Cable?
The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
Product advantages:
1. Wire advantage, use German patented imported wire, use Taiwan imported connector, support PCIe 3.0 full-speed stable transfer
2. Cable length advantage, from 3 cm to 1 meter can be customized, the adapter sold in our shop, the cable impedance is low, the cable length within 60 cm supports PCIe4.0 full speed.
3. Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable
4. The product is made of high-quality materials, the PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content of the gold finger is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance.
5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break The nail drop problem. The wire can be bent or folded without affecting the use.
6. The PCB design is short and fattening, so that it will not get stuck on the graphics card. The fat and long design makes the board easier to install and reduces the chance of damage.
