Details

Material: PFA (nFEP)

Size: 280*200*0.127mm

Applicable Models: For ELEGOO Saturn 2/Saturn 8K/Saturn 3/Saturn 4/Saturn 4 Ultra/Saturn/Saturn S/ Saturn 8

*Compatible with ELEGOO Saturn 2 8K resin 3D printers, Saturn 8K resin 3D printers, Saturn 3 resin 3D printers, and Saturn 4 & 4 Ultra resin 3D printers.

*Made of high-quality PFA materials, wear-resistant, chemically resistant, non-stick surface, UV stable, high-temp resistant, and durable for long-term usage, the release performance is twice better than FEP.

*The life span is 50% longer than the regular version of the release film, and the frequency of releases can be up to 9000 times, smooth surface, with no wrinkles, scratches, and bubbles, which can meet the multiple requirements of different models.

*95% UV light transmittance ensures the right amount of UV to pass through for faster and more accurate curing of 3D printed models, perfectly fit, and less release tension for easy-to-remove models.

*Thicker packaging with foam inside ensures that the PFA Release Liner Film is well protected in all directions from damage and avoids warps.

How to Choose - nFEP or FEP?

When your prints are relatively simple and printing is not frequent, please choose traditional FEP film, because it can meet those basic needs and it is cheaper. But if you print more frequently, the prints are more complex, or you want to obtain more precise printing effects, then nFEP will be more suitable for you. Because nFEP release film with following advantages.

NFEP release film Stable release force Long service life

The evenly coating and stable release force has efficient separation effect. Smooth surface, no wrinkles, scratches or bubbles can meet release requirements of various models with repeated use.

High transmittance More than 95% Transmittance

The 3D NFEP film,with high transmittance over 95%, makes more perfect printing.Transmittance exceeds 95%

Tougher and Stronger

Installation steps

Firstly, remove screws at the bottom ofresin vat and take out the used release film which needs to be replaced.

Then place the new release film betweensteel rims.

Firstly, remove screws at the bottom ofresin vat and take out the used release film which needs to be replaced.

The installed release film is shown inpicture