R22SF/R22SL PCI-E X4 Graphics Card Cable Adapter Cable PCIe X4 3.0 Extender Cord Gen3.0 Extension Ribbon Cord For PC Desktop

Brand new arrival, excellent product performance, word of mouth super good products, official authentic products,100% electrified test delivery.

Product advantage

1.Advantages of wire, imported wire with German patent, Lotes connector imported from Taiwan, high frequency support PCIe 3.0 8G/ BPS stable transmission

2.Line length advantage, from 3 cm to 1 m can be customized, the shop sales of the transfer wiring, wire impedance is low, less than 60 cm line length can be stable support PCIe3.0 full speed.

3.The differential signal has no hole design, and there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and no CAF micro-short circuit phenomenon. The product is durable.

4.PCB USES high frequency and low resistance high quality materials, PCB works precision, PCB USES high TG plate, copper thickness thickened to 1oz, gold finger gold-plated content, gold-plated foot conductive performance is good, can reduce the oxidation rust impedance caused by the rise of the problem of crash.

5.The wire selected by the product itself is very durable, the use of the thickness of 3mm PCB gasket protection in the metal welding point, and lock the screw and hexagon nut fastening, the product is solid and reliable tensile resistance, anti-interference, there will not be broken wire nail problem.

6.PCB dwarfing and fatten design, dwarfing will not be stuck to the graphics card, fatten and lengthening design makes the board card easier to install, reduce the probability of damage

Product Photograph

Summary of technical problems

What is the difference between model R22AB and R22SF?

 

R22SF streamlines the PCIE signal, while R22AB is a customized version for server use, leaving the signal intact

 

What is the quality of the wire?Is it shielded?

 

EMI shielding conductive polymer, new materials for EMI shielding, flat cable design.This technique allows each cable to be fully covered by an emi shield of the conducting polymer to prevent electromagnetic frequency incidence or emission, minimize interference and performance degradation, and reduce the weight of the extender.

 

Precautions for purchase:

1. When inserting the cable, it is necessary to have a clear understanding of the direction, do not insert the socket in reverse or out of alignment, to avoid burning the device. First hold the socket of the device before inserting the cable, to avoid cutting the socket pin too hard.No bending and no pulling within 2cm of the welding of the second end of the wire and the circuit board.