Product Application: PD132 loop detector used for wherever vehicles have to be detected,Monitoring and safe-guarding access ways or for counting vehicles.
Output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems or activating card dispensers in parking lots.
Uses advanced microprocessor technology and can work in diverse environments.
Has two way output relays: one is unlimited output when loop is permanently covered and while the other is multiple mode that can be set by users.
Operating voltage 220V AC ±10%
Power Consumption: ≥5VA
Output relays: 240V/5A AC
Frequency range: 20 kHz to 170 kHz
Reaction time: 10ms
Signal holding time: Unlimited / limited when loop is permanently covered 10 minutes
Sensitivity: adjustable in 8 increments
Wiring: 50μH and 300μH. perfect is 150μH
Loop connection wiring: Maximum length 200 meters, twisted at least 20 times per meter
Autocorrecting time: 1to 2seconds
Operating temperature: -20°C to +65°C
Storage temperature: -40°C to +85°C
Color: Black
Material: plastic
Package Contents:
2 x Car Parking Loop Detector
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
