50kg 65kg Magnetic Lifter, Strong Neodymium Magnet for Lifting Steel Plate Metal, Laser Cut Pickup Tool for Heavy Duty

50kg 65kg Magnetic Lifter, Strong Magnet for Steel Plate Lifting, Heavy Duty Metal Pickup Tool for Laser Cut

【How to Use】

1. Hold the magnetic lifter and align it with the center of the workpiece. Gently place it onto the workpiece. Ensure the magnet surface is parallel to the workpiece surface — no angle or gap.

2. Once the workpiece is securely attracted, hold the handle and lift it. Move it to the desired position.

3. Press down the handle to retract the pin and release the magnet from the workpiece, then move the lifter aside to detach the workpiece.

4. Keep the workpiece parallel to the ground during handling. Do not tilt it at a large angle to avoid the workpiece falling off.

【Precautions】

1. Handle the magnetic lifter with care. Do not strike other objects or drop it from over 10mm — this may damage the magnet.

2. For standard temperature models, workpiece temperature must be below 80°C. Exceeding this will cause irreversible loss of magnetic force.

3. Ensure the workpiece surface is clean and free of debris. Any foreign object will greatly reduce magnetic force.

4. Do not press the handle during transport. This will release the workpiece and may cause injury.

5. Never place your hands or feet under the workpiece during transport in case it falls.