Regarding constant current and constant pressure related processes:
1. When used as a charger, if the battery is not charged, it will be charged according to the set current. As the battery power increases, the voltage will continue to rise, the current will continue to decrease, and the voltage will tend to set the voltage. When the charging current is less than the stop charging current or the timing time is up, the charging will be automatically stopped. Double protection will prevent overcharging and automatically stop charging.
2. When used as a power supply, select "Direct Start" in the mode, set the pulse to 0, stop the charging flow to 0, turn off the timing time, and set the current to the maximum. As long as the load does not exceed this current, maintain a constant voltage state.
The server voltage range is 3-15v, the current range is 0-62A, and the linear accuracy below 10V is generally not suitable for battery charging below 10V).
