Engine Timing Tool Kit for Synchronizing GM Chevrolet Onix 1.0e Tracker 1.0 and 1.2 Lines

Describition

• Tool kit for synchronizing CSS PRIME/ECOTEC 3-cylinder engines with 1.0 12V, 1.0 12V TURBO, and 1.2 12V TURBO versions

• Applicable to the following vehicles: Chevrolet ONIX, ONIX PLUS and Tracker models 1.0 aspirated, 1.0 turbo and 1.2 turbo

Kit contents

• Special 22mm long 100mm hex wrench with double fitting, regular 1/2 square for GM Onyx camshaft timing pulley actuator valve

  bolt, Tracker 1.0 and 1.2.

• Tool to position the camshaft of the GM Onyx and Tracker 1.0 3-cylinder and 1.2-litre 12V Turbo Ecotec engines in synchrony.

• Tool to position the crankshaft synchronously (behind the flywheel) and to lock the flywheel of GM 1.0 12V (3 cylinders) and 1.2

  12V Turbo engines.

• Tool to position the crankshaft in synchronism (via the flywheel / rack) and to lock the flywheel / rack of GM 1.0 12V (3-cyl.)

  / 1.0 12V (3-cyl.) turbo / 1.2 12V (3-cyl) turbo CSS Prime / Ecotec engines. Application: Onix 2nd generation. / Onix Plus (sedan)

  1.0 / 1.0 turbo (19>) and Tracker 3rd ger. 1.0 turbo / 1.2 turbo (20>). It comes with 2 screws and washers for attaching the tool.

• Tool to lock the pulleys with phase inverter of the camshaft, during the removal/installation of the fixing screws of the GM 1.0

  12V (3 cylinders) and 1.2 12V Turbo Ecotec engines.

• Plastic carrying case for better organization and practicality in storage.