It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.

Warm tips:

Phase filering is not available for Flipsky ESC75100 and 75200!
Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.
Here below video and blog links FYI.
YouTube：Click here
Blog：Click here

Please be careful to limit the Absolute Maximum Current below 250A,setting page

Specs:

Size:L85mm*W50.7mm*H33.8mm*H18.5mm+5.9mm USB TYPE
Voltage:14-84V (4-20S)
Current:100A Continuous,burst 120A
BEC:5V@1.5A
Support BLDC square wave mode control and FOC sine wave mode
Firmware: latest (firmware update supported)
ERPM:150000
Control Interface Ports:USB,CAN,UART
Supported Sensors:ABI，HALL，AS5047，AS5048A
Input Set Support:PPM，ADC，NRF,UART
Wire Size: 12AWG
Programmable: Yes
Regenerative Capacity: Yes

Warm tips:

Wiring diagram：

Flipsky 75100 With Aluminum PCB Based on VESC For Electric Skateboard / Scooter / Ebike Speed Controller

Warm tips:

Please be careful to limit the Absolute Maximum Current below 250A,setting page

Warm tips:

Questions & answers