1. With Air-assist: Blowing through the air nozzle, which improves cutting performance and reduces burn marks.
2. Super fast engraving speed: 304 stainless steel, ultra-fast engravingon stainless steel 50mm/s.
3. Remarkable cutting ability: Cutting through 5-8 mm thickness plywood by one pass at speed of 1.5mm/s.
4. Fixed focus laser head: suitable for CNC/Laser engraving machine, easy to install.
5. Original diode: Original diode, high quality, 10,000 hours life time!
6. Strong compatibility: Suitable for various types of laser cutting machines and engraving machines.
80W Laser Module :
Laser wave length:450nm
Laser output power: 10W
Laser Spot :0.08* 0.08mm
Laser shell material: aluminum alloy
Circuit Board Size: 40*40mm
Circuit Board:12V/24V PWM modulation board
Input voltage: 12V/24V
Max Input of laser module: 3~3.5A
Fan speed: 10000 rpm
Operating temperature: -20 ℃ to 70 ℃
Wire Rod:HY2.0, 3Pin terminal (Yellow:PWM +,black: GND, red: VCC )
Laser protective cover: Red cover protects the user's eyes
Laser type and fixed focus method: fixed focus laser, fixed focus through 40mm measuring column
40W Laser Module:
Laser wave length:450nm
Laser output power: 5.5W
Laser Spot :0.08* 0.08mm
Laser shell material: aluminum alloy
Circuit Board Size: 40*40mm
Circuit Board:12V/24V PWM modulation board
Input voltage: 12V/24V
Max Input of laser module: 3~3.5A
Fan speed: 10000 rpm
Operating temperature: -20 ℃ to 70 ℃
Wire Rod:HY2.0, 3Pin terminal (Yellow:PWM +,black: GND, red: VCC )
Laser protective cover: Red cover protects the user's eyes
Laser type and fixed focus method: fixed focus laser, fixed focus through 40mm measuring column
[Applicable Materials]
Engraving materials: paper, paper, cardboard, plastic, white, PCB board, alumina, stainless steel, black metal, ceramic
Cutting material: thin board, acrylic board, cardboard, non-woven fabric, bamboo, some plastic boar
Way1: With The Air Asssit Nozzle
The laser head comes with a specially designed air assist nozzle. When cutting with this laser head, the air assit system will blow air through the air nozzle. That will bring you excellent cutting experience and greatly reduce burned marks. To make full use of the air assist, please prepare an assist pump and air tubing by yourself.
Recommended Air Tubing inner diameter:5mm inner diameter, 8mm outer diameter
Recommended air pump pressure: 150kPa
Way 2： With The Laser Protective Cover
When engraving with this laser head, please use this protective cover that can effectively filter blue light. You can peform engraving without wearing laser goggles for convenience.
Important hint! ! !
1. The red line is the 12V positive pole, the black line is the negative pole, and the yellow line pwm is the positive pole (0-5/12V, 0-20KHZ). If the Pwm of your control board exceeds 5V/12V, it will not be able to control the Pwm adjustment of the laser.
2. Use a laser with a nozzle to cut wood, etc. It is recommended to use it with an air pump to blow away the smoke. After many times of cutting work, the smoke will pollute the lens and affect the engraving effect. Please use alcohol wipes to clean the lens.
3. In the maximum cutting thickness data we show, the wood is pine board/basswood board. The maximum cutting thickness of the laser is affected by the wood density and material.
4. 40w80w is the collective name of laser manufacturers, it does not mean that the input and output power is 40w80w. The specific parameters are displayed on the details page.
Actual Power Measurement 
